Skip to content

Truss 요소

Truss 요소는 축력만을 전달하는 보요소로 생각할 수 있다. 3차원 2절점 트러스 요소인 T3D2만 지원한다. 다음은 보요소와의 비교이다.

  • 트러스 요소는 축력만을 전달하며, 절점에서는 회전자유도가 없는 translational DOF만 존재한다.
  • 보 요소와 동일하게 변단면을 지정할 수 있다.
  • ECS는 지정할 수 있으며, ECS는 하중가력시 방향을 결정하는 용도로 사용하며, 요소내의 강성행렬 계산과는 무관하다.
  • EndRelease, Offset은 무시된다.
  • 축방향을 제외한 방향의 요소내 하중은 양단절점으로 거리에 따라 배분되며, 변형을 유발하지는 않는다.
  • 보요소와 달리 Tendon의 모요소(host element)로 사용될 수 없다.

Fig. 4.3-1 Truss 요소

Fig. 4.3-1. Truss 요소

Example
*Element, Type=T3D2, ELSet=ALL
 1001, 1001, 1002

*Material, Type=IsoElasticity, Name=steel
 200., 0.2

*Section, Type=Beam, Name=truss
*Cell, TYPE=Value, Mat=steel
 0.1

*Distribution, TYPE=Section
 ALL, truss

*Element, Type=T3D2

*Element, Type=T3D2, ELSet=elset
 id, n1, n2, S=section
 ...
Specifications
  • No. of nodes: 2
  • No. of gauss points: 4 (Gauss-Lobatto rule used)
  • Fields: BSF=[Nx], BSE=[Ex], BST=[T0] at Gauss point, Uniaxial model response at each layer of Gauss point
  • Compatible section: Beam
  • Active DOFs: X,Y,Z